The Dense Flow Cone Valve, when combine with the Dense Flow Charging Hopper is able to achieve the same or better performance results where competitors require three or more valves on their Dense Phase conveying Systems.
The Dense Flow Densealloy Pipe Stub is a 2’ hardened section of SCH. 80 pipe. Our Densealloy Hardening process insures the stubs I.D. is 600 BHN which translates into a piece of pipe that will last up to 8 times longer than non-hardened pipe.
The Dense Flow Pocket Elbow is intended for use on pneumatic conveying pipelines, particularly where highly abrasive materials are being conveyed. The cast, short radius elbow body features a unique pocket at the materials deflection point.
Dense Flow Cone Bottom Pressure Vessels are designed and built according to A.S.M.E. code with a pressure rating of 125psi, and temperature rating of 300 Deg. F. Standard pressure vessel sizes range from 1 cubic foot to 250 cubic feet in capacity.
The Dense Flow Air Control Panel houses all the primary air delivery components for JDB Dense Flow Dense Phase Pneumatic Conveying Systems in a NEMA 4/12 enclosure, and all components within are delivered fully assembled and tested before delivery.